Copyright © 2003-2012
All Rights Reserved
Pettit 1792 Zinc Coat Barnacle Spray
ZINC COAT BARNACLE BARRIER 1792 This product is for use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead. It forms an excellent adhesive bond to underwater metals and running gear and inhibits corrosion on these surfaces. Because of its smooth, hard surface it will self-clean in service. Zinc Coat can be used above or below the waterline. Do not apply anti-fouling paint over Zinc Coat. For metal above the waterline apply one (1) coat of Pettit 6627 Tie-Coat Primer after the Zinc Coat has dried for 2 hours. Follow with two (2) coats of Pettit Easypoxy Enamel. The dried film of Zinc Coat contains 93% pure zinc.
Features: Fast dry Superior adhesion to clean metals 93% pure zinc in the dried film Supplied in an easy to use aerosol spray can PHYSICAL DATA: VEHICLE TYPE.....Modified Epoxy FINISH.....Flat COLOR.....Gray COMPONENTS....One CURING MECHANISM....Solvent Release COVERAGE.....10 sq. ft/16 oz. spray can VOC....60% max. APPLICATION DATA METHOD.....Aerosol Spray NUMBER OF COATS....2 or 3 Do not apply more than three coats as cracking and loss of adhesion may occur if product is applied too thick or in too many coats. DRY FILM THICKNESS PER COAT......1.5 mils CLEANER.....120 Brushing Thinner; cleanup all overspray before it dries hard.