Lewmar Pro Series 1000H Windlass

Kit Includes:

  • Lewmar Pro 1000 Horizontal Windlass (Power Up / Power Down)
  • Installation Wrench
  • Dual-Direction Solenoid
  • Rocker Switch
  • Fast Mounting Studs
  • Circuit Breaker
  • Base Gasket Seal

Specifications:

  • Maximum Pulling Power: 454kg (1,000 lb)
  • Max Line Speed: 105 Feet Per Minute
  • Working Load: 250 lbs
  • Chain Size: 5/16" High Test
  • Rope size: 9/16"-5/8" or 5/8" 8 Plait
  • Voltage: 12V
  • Typical Power 700 Watts
  • Normal Current Draw: 50A
  • Circuit Breaker: 70A
  • Dimensions: 5-3/4" H x 9-5/4" L x 7" W
  • Typical Line Speed: 88 ft
  • Weight: 21 lbs
Features:
 
  • DIY-Ready, Easy To Install and Housed In 100% 316 Stainless Steel, Making It Well Protected and Durable
  • Powerful Motor Providing Fast Line Speed (Power Up / Power Down)
  • Convenient Above-Deck Installation
  • Includes Push-Button Control and A Built-In Manual Emergency Recovery System
  • Manual Emergency Recovery Equipped - Requires A Common 1/2 Socket Wrench
  • For Boats Up To 20-45 ft
  • 5 Year Warranty

Direct replacement for Horizon 900!
Lewmar 1000H Pro Series stainless steel windlasses are compact, gypsy only, rope⁄chain horizontal windlasses designed for reliable performance and easy installation. Incorporating a highly efficient spur gearbox, the ProSeries windlasses utilize smaller, but more powerful, permanent magnet motors with lower amp draw and smaller diameter wires than those required by series wound motors driving worm gearboxes. Overall, this makes for a lighter, less costly, and easier one-piece installation requiring no disassembly or motor alignment. Lewmar ProSeries Features All metal components are stainless steel - case, gypsy, chain stripper and control arm Direct replacement for Horizon 900 windlasses - exact same mounting hole pattern, but increased pulling power For Rope, or chain, or combination rodes (3-strand rope required) A clutch mechanism allows for emergency manual lowering Built-in emergency manual recovery system; uses a common 1/2" drive ratchet wrench such as Craftsman or Snap-on ProSeries windlasses come complete with circuit breaker, solenoid control box (1000h only), up⁄down guarded rocker switch, mounting hardware, and installation wrench which fits all the windlass components Footswitches and handheld remotes are available as additional control options; for dual control station installations it is most cost effective to use the1000h Permanent magnet motor: 1000h = 700 Watts 5 (Five) Year warranty (except 1 year on electrical components) Rope size 9/16"-5/8", Chain Size BBB 5/16" Power 12V Typical Max Pull (1000lb) LEW 6657011108102, 6657011108-102. NOTE: LEWMAR Pro-Series 1000H Windlass for boats up to 45' and uses Rope Size (9/16"-5/8") and G4 Chain Size (5/16"). Features: • Rope size: 9/16"-5/8" • Chain size: 5/16" HT • Typical max pull: 1000 lbs. • Working load: 250 lbs. • 100% Stainless Steel case • Max line speed: 105 feet per minute. • Efficient. and reliable. • Easy DIY install. • 5 year warranty. Kit includes: • Windlass • Base gasket seal • Fast mounting studs • Installation wrench • Circuit breaker • Dual-direction solenoid • Rocker Switch

Customer Reviews

LEAVE A REVIEW