All

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. She...

Jaw/Jaw Open Body Turnbuckle - 1/2-20 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our i...

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specific...

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also u...

Hinged Mini Pad Eye - 3/16"This pad eye is a smaller version of our popular #48-580 pad eye. This unit is suitable for awnings and many other tie-...

Tubular Turnbuckle with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily spl...

Double Jaw Rigging Toggle - 3/8" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes a...

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also ...

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes a...

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing t...

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

Cotter, Ring & Clevis Pin Parts KitKit Contents: (30) Clevis Pin Dia. 3/16", Grip 9/32" (30) Clevis Pin Dia. 3/16", Grip 13/32" (10) Clevis Pi...

Quick Release Pin - 1/4" x 1"Specifications: Diameter: 1/4" Grip Length: 1" Use with: 14-205 and 14-206

Quick Release Pin - 3/16" x 9/16"Specifications: Diameter: 3/16" Grip Length: 9/16" Use with: 15-212

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifica...

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications: 1...

Cotter Pin KitKit Contents: (6) Cotter Pin 1/16" x 1/2" Type 316 Stainless Steel (6)Cotter Pin 3/32" x 3/4" Type 316 Stainless Steel (4) Cotter Pi...

Jaw/Jaw Tubular Turnbuckle T-Style 3/8-24 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with o...

Snap Gate Hook - Body Only - 1/4" - 28 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long fr...

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecification...

Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecificatio...

Splice Line Large Boat Kit for Boats up to 40'C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to ...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Single-Hook Anchor Chain Tensioner for 3/8" ChainThese fittings will securely tension and hold the anchor in the bow roller channel.  They will fr...

T-Style Jaw/Jaw Open Body Turnbuckle - 1/4-28 Thread SizeFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupl...

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Over Center Snap Gate Hook for 1/8" WireThe over center design has no load on the swinging hook when closed. This feature allows easy opening, yet...

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.