All

Single DO 550 Rope Clutch Cruising Racing Max 12mm LineFor cruising and racing yachts, offering a holding power of up to 550 kgs. Modern, high-per...

Continuous Line FurlerDesigned for optimum performance in the most demanding of conditions, the HBT1 hybrid-bearing technology combines high speci...

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to ...

Small Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tri...

Line Tamer - White PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging ...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - ...

Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight...

Size 3 Stanchion Lead Block - Single with Becket & Cam Cleat Barton Marine's stanchion lead blocks have proven to be popular with Cruising sai...

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features: Pintle D...

25mm End Stop Genoa Car Track Barton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufa...

32mm Towable Genoa Car 2:1 Purchase - Heavy Duty - BlackBarton Marin's sleek range of Genoa is designed to run on a 32mm (1-1/4”) T Track. All are...

32mm End Stop & Becket Genoa Car Track - BlackBarton Marine's sleek range of Genoa is designed to run on 32mm (1 ¼”) T Track. All are manufact...

32mm Towable Genoa Car 2:1 Purchase - BlackBarton Marin's sleek range of Genoa is designed to run on a 32mm (1-1/4”) T Track. All are manufactured...

25mm Towable Genoa Car 2:1 Purchase - BlackBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT ca...

25mm End Stop Genoa Car Track - BlackBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are...

32mm Towable Genoa Car 2:1 PurchaseBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactu...

Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the...

Laser Replica 15:1 Boom Vang Assembly The Barton boom vang assembly gives all the advantages of systems costing twice the price. 15:1 purchase is ...

Size 1 30mm Plain Bearing Pulley Block Single Fixed EyeThe Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an...

Size 0 20mm Plain Bearing Pulley Block Single Swivel & BecketThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also availab...

Furling Top SwivelThe top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing.Features: Drum Diameter: 25mm Sail A...

Medium Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tr...

25mm Towable Genoa Car 2:1 PurchaseBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are m...

32mm End Stop & Becket Genoa Car TrackBarton Marine's sleek range of Genoa is designed to run on 32mm (1 ¼”) T Track. All are manufactured fro...

Screw Inspection Cover - 6" (103mm) - WhiteThese covers are manufactured from high-impact polycarbonate and feature an easy start thread and a bui...

Shroud CleatBarton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") s...

Size 2 Snatch Block with Stainless Snap Shackle - 35mm SheaveUnique to Barton, these are probably the smallest block of this type available.Import...

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applicati...

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resista...

Size 2 4:1 Vang System, Swivel HeadUpgrade your existing Vang system or use it as a boom preventer. Snap shackle fixings allow for quick and easy ...

Outboard Motor Lifting Sling for Motors to 15hpDesigned and tested at Barton Marine by our design engineers, this Outboard Sling works where other...

Line Tamer - Grey PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging a...

Shroud Cleat with EyeBarton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diamet...

Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Tec...

32mm HD Pin Genoa Car Heavy Duty with Plunger Stop - BlackBarton Marine's sleek range of Genoa is designed to run on a 32mm (1-1/4”) T Track. All ...

32mm Towable Genoa Car 2:1 Purchase - Heavy DutyBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All ...

32mm HD Pin Genoa Car Heavy Duty with Plunger StopBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. Al...

Size 2 Single Cheek BlockPlain Bearing BlocksBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass b...

Single Fixed EyePlain Bearing BlocksBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, e...

4mm Dyneema Loop with High Load Eye - 12mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applicati...

Stainless Steel Large Split Rings - 14mm - 10-PackFeatures: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of...

Size 0 20mm Plain Bearing Pulley Block CheekThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sh...

Large Snatch Block for Yachts Up to 40' (12.2M) - Stainless Steel SnapBarton Snatch Blocks give the crew the option to locate the block anywhere o...

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications: Stainless Steel Deck Eye Single 14mm Height ...

Size 3 45mm Plain Bearing Pulley Block Stanchion Lead BlockThe size 3 Barton plain bearing blocks have 45mm (1 3/4" sheave size 3 block range inco...

Genoa Slide Car (25mm)Designed with a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will ...

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck pla...

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Gen...