All

Charter Helm Low-Back with Bloster - Off WhiteThe luxury Charter Helm Low-Back seat with Bolster provides maximum comfort for long rides. Plush fo...

2-3/8" Plug-In™ Stainless Steel Square Base - 7"x7"Made of stainless steel. Suitable for above or under carpet applications. Below deck mount requ...

Thread-Lock™ Table BaseHigh-strength 2-3/8″ threaded aluminum table base with satin finish. 7″ diameter with 5-3/4″ hole pattern. Total height: .6...

4" Offshore Fixed-Height Helm Pedestal PackagePackage includes heavy-duty 4″ Workhorse slide & swivel with anodized finish, fixed-height brite...

4" Elite Fixed-Height Pedestal - 30"4″ Pedestal of .213″ thick aluminum with 12″ round base, polished finish. The pedestal is sized and pressed in...

Economy Folding Seat - RedFeatures: Now A Comfortable Cushioned Seat To Support Your Backside  Durable Upholstery Folds Easily Strap With Snap To ...

In-Shore LE1 Adjustable Mainstay PackageHeavy-duty adjustable mainstay package includes locking Trac-Lock™ air-ride slide & swivel, 316 electr...

4" In-Shore RS2 Pedestal PackagePackage includes locking Workhorse swivel mount with anodized finish, high-strength polished aluminum fixed-height...

5-Legged Deck Base Floor Pod Replacement - 1/2"Floor pod replacements for a 5-legged deck base.

Plastic Swivel for Motor SupportReplacement swivels for economy Guardian motor support heads.

Workhorse Air-Ride Slide & Swivel - 4"10-1/2″ x 14-1/2″ x 1/4″ aluminum formed slide plate with anodized aluminum finish and heavy-duty stainl...

Spring-Lock™ Non-Locking Post - 13.5"Hefty 1-3/4″ diameter stainless steel posts. Use with non-locking Spring-Lock™ seat mount ot any non-locking ...

Brass KingPin™ BushingBrass replacement bushing for KingPin™ base.

Quick-Change Trailer Jack for Wheel Size 10"-15"High-strength aluminum construction fits round or square axles and makes elevating your trailer qu...

ABS Plastic Rod Holder - 3 Rod - Pair with BungeeABS plastic with foam inserts. Holds up to 3 rods and can be installed vertically or horizontally...

T-Brace for Bolt-OnTrailer bolt-on T-Brace replacement for Guardian Motor Support.

Stowable Base Socket CoverPlastic stowable cover keeps sockets clear when not in use. Used for any 2-3/8″ tapered post table base. (sold as each).

KingPin™ Taper-Lock™ AdapterInserts into Taper-Lock™ base to accept KingPin™ posts or mounts.

Nylon KingPin™ BushingNylon replacement bushing for KingPin™ base (sold as each).

KingPin™ Standard Square Steel Base - 7"x7" - Kennedy BaseStandard square mild steel base with black krinkle finish. 3″ below deck needed. Require...

2" Taper-Lock™ Hi-Lo BushingReplacement bushing for the top of 2″ Hi-Lo posts. For use on models 2020 and earlier.

2-3/8" Thread-Lock™ Uni-Lock Table Pedestal Package - 27"Package includes 2-3/8″ uni-lock post, 27″ table mount, and base. Use with Uni-Lock table...

KingPin™ Standard Square Steel Base with Satin E-Coat - 7"x7"Standard square mild steel base with satin finish. 3″ below deck needed. Requires a 2...

Spring-Lock™ Replacement End CapReplacement Spring-Lock™ end cap for securing the locking latch in the post.

Universal Chair Mounting PlateAdapts a swivel mount to fit most seat mount patterns. High-strength aluminum. Use with any Springfield® marine swiv...

Thread-Lock™ Aluminum Surface Mount Base - 10"High-strength aluminum surface mount base with anodized finish. Use with any Thread-Lock™ fixed-heig...

Trac-Lock™ Hi-Lo Fixed-Height Post - 13"2-3/8″ Anodized aluminum post. Use with seat mount (#1600205, sold separately). Use with any Taper-Lock™ b...

2-3/8" Clipper Adjustable PackagePackage includes 2-3/8″ adjustable pedestal with 10″ round base and non-locking Trac-Lock™ swivel. Pedestal adjus...

5-Legged Deck Base Caster Replacement - 75mm with Brake Urethane5-pack caster replacements for a 5-legged deck base.

KingPin™ Unintentional Detach Retention Cup - PlasticReplacement standard post pin for use in KingPin™ standard base.

Table Top Party Platter - WhiteLightweight molded heavy-duty marine-grade plastic table top. No umbrella socket.

Taper-Lock™ Seat Swivel BushingReplacement bushing for Taper-Lock™ Hi-Lo swivel. Washer included.

Guardian Motor Support Combo - DeluxeCast aluminum head with high-strength aluminum shaft. Supports the cantilevered weight of the motor while sta...

Non-Locking Spring-Lock™ Seat MountE-coat rust-resistant finished stamped steel. Adds 1-1/2″ to the height of the post. Use with any Spring-Lock™ ...

2-3/8" Trac-Lock™ III Swivel BushingReplacement bushing for 2-3/8″ Trac-Lock™ III slides and swivels. Use on Trac-Lock™ III 2002 and newer.

KingPin™ Base Socket CoverPlastic KingPin™ cover keeps sockets clear when not in use. Use on KingPin™ 3/4″ pin base. (sold as each).

Aluminum Dock BenchStrong anodized aluminum frame with extruded aluminum support legs, weather-resistant for harsh marine environments. Heavy-duty...

2-3/8" Stowable Post ClipsConveniently stow your 2-3/8″ posts when not in use. (sold in pairs, for bulk see #2400104).

2-3/8" Plug-In Hi-Lo Replacement BushingReplacement bushing for 2-3/8″ Plug-In™ Hi-Lo seat mount. Helps to distribute the weight load across the t...

Spring-Lock™ Replacement Locking LatchSpring-Lock™ post base locking mechanism replacement latch.

2-3/8" Bolt-Lock Table Pedestal Package - 27"Package includes 2-3/8″ High-strength anodized aluminum post (#3662027), high-strength black plastic ...

KingPin™ Standard Square Steel Base with Brass - 7"x7"Standard square stainless steel base with satin finish. 3″ below deck needed. Requires a 2-1...

Bolt-On Clevis PinReplacement tension clip between the extrusion and bolt-on T-brace.

Party Platter Thread-Lock™ Surface Mount Table Package - WhitePackage includes party platter table top, 2-piece anodized aluminum locking Thread-L...

Spring-Lock™ Power Pedestal Repair KitRepair kit for Spring-Lock™ Power-Rise pedestals.

Guardian Motor Support, Standard Combo, Over the Roller & Bolt-OnCast aluminum head with high-strength aluminum shaft. Supports the cantilever...

3-Stage Table Pedestal PackagePackage includes gas-powered adjustable high-strength aluminum table post with 12-1/2″ table mount and 12″ diameter ...

Support Bushing KitReplacement bushing kit and V-bumper for pivot brackets on Guardian Deluxe and Standard heads to reduce abrasion on the lower u...