Interlux Aqua-One Performance Ablative Antifouling

Key Features 

• Environmentally-friendly, water-based formula
• No heavy solvent smell
• Easy application and clean-up 
• Compatible over most antifouling paints
• Controlled wearing minimizes build-up for less sanding at haulout
• Dries fast for reduced time to launch

Physical Data

• Type: Water-based ablative
• Finish: Matte
• Available colors: Blue, Green, Red, Black
• Components: 1
• Curing mechanism: Solvent Release
• Solids by Volume: 36%
• Coverage: 375sq. ft. /gal.
• VOC: 240 grams/liter (Max) 
• Active ingredients: 65% Cuprous Oxide
• Flash point: 98°F Degree  

Application

• Application Method: Brush, roller, airless, or conventional spray
• Number of coats recommended: 2-3 by brush/roller. 3 coats (first thinned) 
• Wet Film Thickness: 3.3 mils
• Dry Film Thickness: 1.5 mils
• Applicator: High-quality short nap roller (maximum 3/8” nap)
• Application temperature Min. /Max. Range: 41°F/95°F
• Thinner: Special Thinner 216, Brush-Ease 433Water

Drying Times*(Hours)

*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching.

Although every effort has been made to ensure the colors on screen are as close as possible to actual paint colors, we cannot guarantee an exact color match. Paint swatch colors will vary depending on your screen settings and resolution. The manufacturer cannot be responsible for slight variations.