Marine Hardware

Fender CleatLength: 2"Base: 1-1/16" x 1-9/16"Fastener:#6(4)Material: Chrome Plated Brass Specifications: Finish: Chrome Size: 2" Construction: Bra...

15" Gas Spring - 20lb - Black NitrateFeatures: Black Nitride Gas Spring Ext. Length - 15" Comp. Length - 9-1/2" Rod Dia. - 6mm Tube Dia. - 15m...

Description: Plate - 2-3/4" x 1-1/4"Material: 304 Stainless Steel Stock: 3/8" Eye Ring Diameter: 1"Thread Length: 3-7/16"

Description: 316 S.S. Hose Deck Fill with Key Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - Yes Fastener - #10 (3) Weight - 12.8 oz.Materi...

Stainless Steel Set Screws1/4"-28 Thread10 Pack

7-1/2" Gas Spring - 40lb - Black NitrateFeatures: Black Nitride Gas Spring Ext. Length - 7-1/2" Comp. Length - 5-1/2" Rod Dia. - 6mm Tube Dia....

Navigation Rack5"H x 16-3/4"W x 3-1/2"D

Teak Louvered InsertHeight:7-1/2"Width:9-1/8"Depth:3/4"Cut OutHeight:6-1/2"Width:8-1/2"Measurements for the inserts, door, and drawer/door fronts ...

Compression Handle - Nylon White/Stainless Steel - Non-LockingCompression handles reduce and eliminate noise and rattle from hatches when the boat...

Ground Fault Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Description: 316 S.S. 6" E-Z Push-Up Cleat. Overall length-6-1/2" Overall width - 1-1/2" Depth - 3-9/16" Cleat length - 6" Stud length - 1-7/8" Ba...

20" Gas Spring - 40lb - Stainless SteelFeatures: 316 S.S. Gas Spring Ext. Length - 20" Comp. Length - 12" Rod Diamter - 5mm Tube Diameter - 15...

Long Towel Bar 23"L x 1"H x 2-1/2"D Includes mounting hardware

Rectangular Drawer Pull 3-1/4" Length Recess Mount, 1/2" Deep 2-Pack

Teak Louvered InsertHeight:16"Width:9-1/8"Depth:3/4"Cut OutHeight:15"Width:8-1/8"Measurements for the inserts, door, and drawer/door fronts are fr...

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Clam Shell Midget Vent 2-1/4" x 2-1/4" Material: 304 Stainless Steel Size: 2-1/4" x 2-1/4" Fastener: #6 (3)

Wall-Mount Paper Towel Holder Takes standard or jumbo roll Spring-loaded bar 1-7/8"H x 12-1/4"W x 4-3/8"D

Non-Locking Nylon T-Handle - White/WhiteWhitecap's Non-Locking White Nylon T-Handle.Specifications: Overall Dimensions: 3" Cut-Out - 2-1/2" Surf...

Louvered Door & FrameCutout: 11" x 11"Left Hand Opening

Description: 316 S.S. Heavy Duty Hollow Base Cleats Length - 8" (20cm) Height - 2-1/4" Fastener - 1/4" (4) Weight - 23.5 oz.Material: 316 Stainles...

Teak Marine LumberThickness: 1/2"Width: 1-3/4"Length: 36"

Spring Loaded Slide Bolt/LatchGreat for use on heavy fiberglass doors including transom fish doorLength: 5-5/16"Fastener: 1/4"Material: 316 Stainl...

Flush Pull Ring Size: 3" x 2" Fastener:#8(4) Material:Chrome Plated Brass WARNING: This product can expose you to chemicals including LEAD which...

T-Handle Latch - Nylon Black/Black - Non-LockingFeatures: Threaded offset cam bar with set screw included Neoprene O-Ring Shaft is 1-3/8" long u...

Teak Swim Platform - 18"Features: Teak Swim Platform- 18" 18" W (back), 17" W (front) x 15" D x 1-5/16" Thick

4-Step Telescoping Swim LadderFeatures: 304 Stainless Steel with plastic treads Includes mounting hardware 1" diameter tubing 4 Steps Telescopes f...

Grate Front Magazine Rack Wall mount 11-1/4"H x 10-1/2"W x 4-3/8"D

Solid Teak Grab Handle 1-3/8"W x 9-3/4"L x 2-1/4"H Pre-drilled 3/16" mounting holes Fasteners not included Mounts almost anywhere

Louvered Door & FrameCutout: 11" x 11"Right Hand Opening

Two Insulated Drink Rack 12-3/8"L x 4-1/2"H x 4-3/4"D Larger openings hold two cans in insulated drinkholders, cups or bottles

Solid Teak Handrails Six-Loop Handrail 63"L x 2-3/8"H x 1"D

Towel Bar 14"L x 1"H x 2-1/2"D Includes mounting hardware

Cabin Door HookLength: 2"Fastener: #6(4)Material: Polished Brass*Hooks pre-drilled for #6 screwsWARNING: This product can expose you to chemicals ...

Director's Chair with Cream Cushion - TeakFeatures: Teak Director's Chair with Cushion Seat Covers Chair with Cream Seat Cushion Stainless steel h...