Marine Navigation & Instruments - Transducer Accessories

8-Pin Transducer Extension Cable - 30'Connect your transducer to your sonar device with this 30'(9M) 8-pin extension cable.WARNING: This product c...

4-Pin Transducer to 12-Pin Sounder Adapter CableConnect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapt...

Panoptix LiveScope™ Transducer Extension Cable - 10' - 21-PinExtend the cable length of your compatible Panoptix™ transducer with this 10 ft (3 m)...

Flat Mount Bracket f/StructureScan 3D Ducer & TotalScan Ducer3D Transducer Flush Mount Bracket is used to flush mount the transducer under the...

8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8...

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units.

Trolling Motor Mount f/GT36 and GT56 Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mo...

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Navico units.

50/200kHz Skimmer Transducer Mounting KitFeatures: 50/200kHz Skimmer transducer mounting kit Heavy duty plastic mounting bracket Specification...

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) ca...

Extension Cable For LSS-1 or LSS-2 TransducerFor use specifically with Lowrance's LSS-1 or LSS-2 Transducer. If the 20' transducer cable is not l...

MEGA Live 2 Transom Mount BracketThe MEGA Live 2 Transom Mount expands the versatility of MEGA Live 2, allowing anglers to install the transducer ...

Transducer Mounting PlateFeatures: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with...

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor Specifications: Type: Adapters Box Dimensions: 3"...

Extension Cable for HOOK² TripleShot/SplitShot Transducer - 10'10' extension cable for connecting TripleShot/SplitShot Transducers to HOOK² Specif...

MHX MXNT Transom Mount Hardware f/MEGA TransducerStainless Steel mounting hardware for the XNT transom mount transducers.WARNING: This product can...

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications:...

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short...

Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Type: Mounting Brackets Box Dimensions:...

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers ...

Trolling Motor MountEasily attach your compatible scanning transducer to the trolling motor of your boat. The low-profile design of the mount prov...

Perspective Mount f/Livescope Plus LVS34The Perspective Mode Mount takes your LiveScope™ Plus real-time scanning sonar to the next level. Attach y...

12-Pin To Dual 4-Pin Transducer Y-CableUse this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.W...

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a c...

Panoptix™ LiveScope™ LVS12 Trolling Motor Shaft MountMount a compatible Panoptix™ transducer on the shaft of your trolling motor with this kit. It...

Adapts older SI-TEX transducers to current ones Digital A Cable8-pin Fuji (old type metal plug) to 8-pin CONXALL (plastic waterproof plug). Speci...

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with SI-TEX NavPro ...