{"product_id":"interlux-404-414-epoxy-primekote-gallon-kit","title":"Interlux 404\/414 Epoxy Primekote Gallon Kit","description":"\u003ch2 data-mce-fragment=\"1\"\u003eInterlux Epoxy Primekote Two-Part Primer\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEpoxy Primekote is a multi-purpose two-part epoxy primer that is the recommended primer for use with two-part finishes such as Perfection® Polyurethane and can also be overcoated with any Interlux topside paint. It is also used as part of a system to resurface cracked and crazed gelcoat prior to the application of topside paint and over clear epoxies to eliminate the effects of amine blush. It's bright white color makes it ideal for priming bilge and locker areas.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSuitable under all Interlux topside finishes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used to re-surface cracked and crazed gelcoat prior to the application of topside paint\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used over clear epoxies as a sanding surfacer and to eliminate the effects of amine blush\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApplication by spray or roller\/brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFinish:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eMatte\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMix Ratio:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e3:1 by volume (as supplied)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCoverage (approx.):\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e450 ft²\/gal by brush, 375 ft²\/gal by spray\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eApplication Methods:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAirless spray, brush, roller, conventional spray\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eNumber of Coats:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAbove the waterline: 1-2, below the waterline: 5-6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow To Apply Interlux Epoxy Primekote Primer\u003c\/h2\u003e\n\u003cp\u003eStir or shake individual components thoroughly. Add curing agent to the base a 1 part curing agent to 3 parts base (by volume). Stir and leave for 20 minutes induction time and to allow the bubbles to disperse. Do not apply over one part paints. Apply to clean, dry, properly prepared surfaces only.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method\u003c\/strong\u003e: Airless Spray, Brush, Conventional Spray, Roller (Pressure Pot)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAbove the Waterline:1-2    Below the Waterline:5-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Film Thickness per Coat: \u003c\/strong\u003e2 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e450 ft²\/gal by brush, 375 (ft²\/Gal) by spray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e50°F Min. \/ 90°F Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBrush Reducer 2333N and Reducing Solvent 2316N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" id=\"Dry Times\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDRY TIMES:\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp\u003c\/td\u003e\n\u003ctd\u003eTo Touch\u003c\/td\u003e\n\u003ctd\u003eTo Recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95°F\u003c\/td\u003e\n\u003ctd\u003e1 HR\u003c\/td\u003e\n\u003ctd\u003e6 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e73°F\u003c\/td\u003e\n\u003ctd\u003e2 HR\u003c\/td\u003e\n\u003ctd\u003e8 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50°F\u003c\/td\u003e\n\u003ctd\u003e3 HR\u003c\/td\u003e\n\u003ctd\u003e12 HR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote: Epoxy Primekote must be sanded between coats and prior to overcoating with topside finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Fiberglass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDegrease with Fiberglass Solvent Wash 202 or Fiberglass Surface Prep YMA601V.\u003c\/li\u003e\n\u003cli\u003eAbrade with 120-220 grade paper. Remove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eClear Epoxy\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eAllow three to seven days for clear epoxies or cure fully.\u003c\/li\u003e\n\u003cli\u003eRemove amine blush by using Fiberglass Surface Prep YMA601V.\u003c\/li\u003e\n\u003cli\u003eRinse with fresh water and allow to dry.\u003c\/li\u003e\n\u003cli\u003eAbrade with 80-120 grit paper. Remove sanding residue.\u003c\/li\u003e\n\u003cli\u003eRepair any defects with Watertite, then sand with 120-220 grade paper and remove sanding residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Metal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSurface should be blasted to bright metal.\u003c\/li\u003e\n\u003cli\u003eIf blasting is not possible, grind with 36 grade discs.\u003c\/li\u003e\n\u003cli\u003eApply one coat of Interprotect 2000E that has been thinned 10-15% with Reducing Solvent 2316N.\u003c\/li\u003e\n\u003cli\u003eFollow overcoating times for InterProtect 2000E and apply Epoxy Primekote.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface with 80-120 grade paper, and wipe clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply the first coat and allow to dry overnight.\u003c\/li\u003e\n\u003cli\u003eSand between coats with 120 grade paper.\u003c\/li\u003e\n\u003cli\u003eAirless Spray Pressure: 170-204 bar\/2500-3000 psi. Tip Size: 0.53 mm\/21 thou.\u003c\/li\u003e\n\u003cli\u003eConventional Spray: Pressure Pot: Pressure: 3.44-4.47 bar\/50-65 psi (gun pressure); 8-10 psi (pot pressure). Tip Size: 1.8-2.2 mm\/70-85 \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BoatBandit","offers":[{"title":"Default Title","offer_id":39594431381687,"sku":"INT 404\/414 KitG","price":180.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0547\/0702\/8151\/products\/int404kitg.jpg?v=1618404135","url":"https:\/\/www.boatbandit.com\/products\/interlux-404-414-epoxy-primekote-gallon-kit","provider":"BoatBandit","version":"1.0","type":"link"}