Skip to content

Jabsco 18660-0121 Water Puppy

Original price $209.99 - Original price $209.99
Original price
$209.99 - $209.99
Current price $209.99

Jabsco 18660-0121 Water Puppy

Self-priming pump can be located above the fluid source and can lift it up to 4'

Bronze pump head resists corrosion; and bronze body features a reusable O-ring-type end-cover seal. Complies with USCG 183.410 and ISO 8846 (ignition protection).

  • Application: Bilge pump; livewell circulation; washdown; general pumping requirements
  • GPM: 6.3 (fwd); 7.8 (reverse)
  • Self-Prime: 4 ft. dry suction (self-priming) lift; 20 ft. lift when primed
  • Material: Bronze body; neoprene impeller
  • Port Sizes: 1/2" NPT female ; with adapters for 3/4" garden hose and 1" hose barbs
  • Dimensions: 3 3/8"H x 4 3/4"W x 6 3/8"L (7 1/8"L reversible)
  • Draw: 6.8-9.0A @ 12V DC
  • Warranty: One Year

Standard 6.3 GPM Pump

Name Value
Amperage 8 Amps at 12 Volts
Capacity 6.3 Gallons per Minute
4' Dry/20' Lift when Primed
Diameter 1/2" NPT
3/4 GHT
1" External Hose Barb
Dimensions 4 3/4" Width x 3 3/8" Height x 6 3/8" Length
Material Bronze
Voltage 12 Volts DC
Warranty Details One Year Limited


These pumps are self-priming and may be mounted in any position. They can be located above and away from corrosive liquids and potentially dangerous bilge areas. Corrosion resisting bodies and self-lubricating qualities assure minimum maintenance and long life. Bronze pump unit has removable end covers for easy impeller service. Ideal for bilge pumping; deck washdown; livewell circulation and general purpose pumping. Has garden hose intake and discharge fittings; pumps 5-gallons per minute. For 12-volt operation. Draws 6.5 amps. Dimensions 3"x4"x6-3/8". Motor: Permanent magnet type; fully enclosed; stainless steel shaft. Size: 3 3/8" X 4 3/4" X 6 1/2": 3 3/8" X 4 3/4" X 6 1/2" Motor: Pmdc; Tenv 8.0 Amp Nominal; 15 Amp Fuse Dimensions: 3" (76mm) high; 6-3/8" (162mm) long; 4-3/4" (120mm) wide Weight: 4-1/2 lb (2 kg) (approx.) Liquid Temp.: 45-180 Degrees F (7-82 Degrees C) Neoprene Ship Wt.: 4.5 Lbs (2 Kg) Body: Bronze Impeller: Jabsco Neoprene compound Seal: Lip type Ports: 1/2" Internal Pipe Threads 1" External Hose Barb Adaptor for 3/4" External Garden Hose Thread included Motor meets USCG Electrical Standards 183.410 and ISO 8846 MARINE for IGNITION PROTECTION on gasoline powered vessels. 8 gpm (32 lpm) at 10ft (3m) total head. 380 gph (1430 lph) output at 3m (10ft) total head. Self-priming up to 4ft (1.2m) allows mounting above wet bilges. Bilge debris presents no problem to this bronze bodied; flexible impeller design. Simple design means fewer wearing parts all user serviceable. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection). ISO 8849 MARINE (Bilge Pump Standard).